De Blackmagic Design Teranex Mini IP Video 12G kan SDI video apparaten verbinden met IP om hiermee te werken over Ethernet.
Now you can convert video to IP and route it over your existing ethernet network, or you can convert IP video back to SDI. Teranex Mini IP Video 12G uses standard Blackmagic Videohub software and hardware control panels to configure and switch IP video over ethernet as easily as SDI signals! You get 12G-SDI and the low latency broadcast quality TICO codec so you can route HD over the built in gigabit ethernet connection or Ultra HD over 10G ethernet with an optional 10G SFP!
1 x 10-bit HD-SDI, 6G-SDI and 12G-SDI
2 x 10-bit HD-SDI, 6G-SDI and 12G‑SDI
Gigabit ethernet supports 3G-SDI up to 1080p60 using TICO encoding/decoding. Optional 10G optical data ethernet supporting Ultra HD up to 2160p60 using TICO encoding/decoding.
Auto detection of HD-SDI, 6G-SDI or 12G‑SDI.
USB 2.0 high speed (480Mb/s) interface or via Ethernet.
Ethernet or USB 2.0 for firmware updates and IP address setting.
On all SDI outputs, auto switching between high definition, 6G-SDI or 12G-SDI video.
720p50, 720p59.94, 720p60
1080i50, 1080i59.94, 1080i60
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60
1080PsF23.98, 1080PsF24, 1080PsF25, 1080PsF29.97, 1080PsF30
2Kp23.98 DCI, 2Kp24 DCI, 2Kp25 DCI
2KPsF23.98 DCI, 2KPsF24 DCI, 2KPsF25 DCI
2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p50, 2160p59.94, 2160p60
4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI
SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 310M, SMPTE 425M level A and B, SMPTE 2081‑1, SMPTE 2081‑10, SMPTE 2082‑1, SMPTE 2082‑10, ITU‑R BT.656 and ITU‑R BT.601
SDI video input is switchable between high definition, ultra high definition and 4K. SDI switches between 1.5 Gb/s HD-SDI, 3G-SDI, 6G-SDI and 12G‑SDI.
4:2:2 plus 4:4:4 up to 4K DCI 30p
Television standard sample rate of 48 kHz and 24‑bit.
10-bit 4:2:2 and 4:4:4
YUV or RGB for inputs, YUV for SDI outputs.
Automatically selects between HD-SDI, 6G-SDI and 12G‑SDI.
Video payload identification ancillary data as per SMPTE 352M.
Optional Teranex Mini Smart Panel with 2.2 inch LCD for menu settings.
Blackmagic IP Video Setup and Videohub Router Control Software included on SD card for Windows and Mac.
Via included updater application.
Mac 10.15 Catalina,
Mac 11.1 Big Sur or later.
Windows 10, 64-bit.
Built in switches, setup software utility, or optional front mounted Teranex Mini Smart Panel with LCD, rotary knob and six settings buttons.
IEC power cable required. 100 - 240V AC input.
Settings preserved and restored instantly at power on.
Can be powered via 48V DC using PoE+ (power over Ethernet).
16 Watts
YUV 4:2:2 in HD, 2K and 4K. 33 point LUT can be loaded via the Teranex Utility.
-20° to 60°C (-4° to 140°F)
0% to 90% non‑condensing