Aanbieding
  • AJA OG-DANTE-12GAM, openGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder
  • AJA OG-DANTE-12GAM, openGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder
  • AJA OG-DANTE-12GAM, openGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder
AJA
593478

AJA OG-DANTE-12GAM, openGear 12G-SDI/DANTE 64-Channel Embedder/Disembedder

AJA OG-DANTE-12GAM is een openGear, Dante audio embedder/disembedder, met dubbele 12G-SDI input en output poorten die tot 32 kanalen audio embedding en 32 kanalen disembed tegelijk bieden.

4-7 werkdagen
  • €3.139,00 (excl. btw)
    €3.798,19 incl. btw
  • - 0%

OG-DANTE-12GAM is an openGear, Dante audio embedder/disembedder, with dual 12G-SDI input and output ports providing up to 32-channels of audio embedding and 32-channels of disembedding simultaneously. OG-DANTE-12GAM provides the bridge between SDI and Dante infrastructures.

Dante audio networking provides digital audio distribution over local and wide-area networks with low latency, using standard network hardware or by connecting into a standard network infrastructure. This offers many advantages over analog, AES, and MADI infrastructures, including audio system scalability, easier installation, and simplified wiring. 

A fully populated OG-X-FR openGear frame with ten OG-DANTE-12GAM cards provides an incredible 640-channels of audio bridging in a rack-mountable form factor for a wide range of needs. 

Features

  • Support for 12G/6G/3G-SDI audio embedding to and from the Dante audio ecosystem
  • Dual, and independent 12G-SDI Input and Output ports, each supporting 16 audio channels, totaling 64-channels per card in a compact design
  • 1x Primary and 1x Secondary GigE ports for Dante network redundancy
  • 64-channels of simultaneous SDI/Dante audio bridging per card
  • 2x Internal Signal Generators which enables transmitting Dante audio channels over SDI without having an external SDI source signal
  • DashBoard support for remote signal status and configuration
  • Compatible with a range of Dante software from Audinate including Dante Controller for routing and configuration choices
  • High density and small form factor, enabling 10 cards to be utilized in a single openGear frame for up to 640-channels of SDI/Dante audio bridging
  • Supported within OG-X-FR and OG-3-FR openGear frames
  • Hot swap capable

Video Formats

  • (4K) 4096x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (2K) 2048x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1920x1080i 50, 59.94, 60
  • (HD) 1280x720p 50, 59.94, 60* 
  • (SD) 625i 50
  • (SD) 525i 59.94
  • RGB and YCbCr, 4:4:4/4:2:2, 10-bit 

 

Note: Raster and frame rate dependent, please see OG-Dante-12GAM Video Formats in Documents and Manual.


Video Input Digital

  • 2-channel independent 12G-SDI BNC connectors, SMPTE 259/292/424/2081/2082
    • Single Link SD/HD/2K/UltraHD/4K

Video Output Digital

  • 2-channel independent 12G-SDI BNC connectors, SMPTE 259/292/424/2081/2082
    • Single Link SD/HD/2K/UltraHD/4K

Internal Signal Generator

  • 2x independent internal signal generators

Cable Equalization

(Belden 1694A coax)

  • 12 Gbps, 65m
  • 6 Gbps, 120m
  • 3 Gbps, 180m
  • 1.5 Gbps, 200m
  • 270 Mbps, 405m

Video Path Delay

Video Out is a delayed, reclocked version of Video In, at the same format and frame rate. Video Out is undefined when no input.

  • Video Latency, time measured between video input and video output connector:
    • 12G = 3.2 µsec
    • 6G = 3.2 µsec
    • 3G level B-DL = 6.3 µsec
    • 3G level A = 3.2 µsec
    • HD (1.5 Gb) = 6.3 µsec
    • SD (270 Mb) = 17.2 µsec

Audio Input Digital

  • SDI: Two independent 12G-SDI BNC connectors, 16 embedded channels each
  • Dante: 1x Primary Ethernet port and 1x Secondary Ethernet port, 32-channels 

Audio Output Digital

  • SDI: Two  independent 12G-SDI BNC connectors, 16 embedded channels each
  • Dante: 1x Primary and 1x Secondary Gigabit Ethernet ports, 32-channels

SDI Embedded Audio

  • SMPTE 299M (12G/6G/3G/1.5G): 24-bit, 48 kHz synchronous
  • SMPTE 272M (SD): 20-bit, 48 kHz synchronous
  • Incoming embedded audio can be passed, removed, or overridden
  • 4 groups (16-channels) of audio supported per SDI path
     

Note: 2048x1080p/PsF 29.97 and 30 formats support a maximum of 8-channels embedded audio.


Dante Audio

  • Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz
  • Encoding: PCM 16, PCM 24, PCM 32

Audio Latency

  • Embed Path     1500 µsec
  • Disembed Path  1410 µsec

User Interface

  • openGear DashBoard network control software via Windows, macOS or Linux
  • Dante Controller

Size

  • openGear standard form factor, front slot and rear card. Two slots required for each card.

Weight

  • 0.5 lb (0.3 kg)

Power

  • openGear frame compatible, 15 watts max per card

Environment

  • Safe Operating Temperature: 0 to 40 C (32 to 104 F)
  • Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
  • Operating Relative Humidity: 10-90% noncondensing
  • Operating Altitude: <3,000 meters (<10,000 feet)